Resonant Low Pass Gate with a twist
What is to say about the RLPG, well it is an LPG with resonance. LPG’s are famous for their bongo sound when triggered. You can put any sound into it and then send voltages, triggers in the available inputs. This mmodule likes you to experiment with it.
It includes Voltage Control of the Pre-VCA, Post VCA and Resonance amount. There is a switch to select mode High or Deep sound.
Also, regarding the VACTROLs, you can use Xvive or alternative copies, all works but different flavours.
Fianlly available!
Two-channel oscilloscope for banana and mni jack systems with integrated frequency counter and FFT spectrum analyzers. Above that it can also be used as a generator for waveforms and send a clock signal. A great oscilloscope and analysis tool...and more!
Features
real-time sampling rate up to 307ksps
equivalent-time sampling rate up to 16Msps
up to 2 channels
FFT display mode
bandwidth is around 100kHz
Pulse generator frequency range is from 0.238Hz to 8MHz
Function Generator frequency range is from 0.01Hz to 9999.99Hz (practically 1kHz)
Function Generator functions are sine, saw, reverse saw, triangle, noise, sinc5, trapezoid, chainsaw
settings are saved automatically
In the real-time sampling mode (not in the equivalent-time sampling mode), the pulse generator and the DDS function generator can be used at the same time with the oscilloscope. That is, you can observe the self generated pulse and the DDS function waveform.
Link in bio