I’m gonna make work of this after receiving several requests. Joystick with 4 outputs. X, Y and a calculated mix of X and Y .A pulse is send out after the end of a recorded sequence and/or touching the joystick . The recorded sequence kan be slowed down when moving the joystick to the left or speed up when moving to the right. The sequence can also be frozen in time.
3 days ago
Many moons ago I posted the CLOCKX+ the "expander" CLOCKX but can also be used as standalone module.
Rate and mode of the clock controlable by CLOCKX. All 6 enveloppe shapers / enveloppe follower / peak detector / slew / filters controlable by CLOCKX or seperate clock in.
#4umodular
#sergemodular
#mangoest
7 days ago
Tiny boat holding the TEXTURE SYNTH and the CHAOS.
VCF, LPG, R2R and JUMB 0HP modules are used along.
#0hp
#mangoest
#4umodular
#sergemodular
1 week ago
Fianlly available!
Two-channel oscilloscope for banana and mni jack systems with integrated frequency counter and FFT spectrum analyzers. Above that it can also be used as a generator for waveforms and send a clock signal. A great oscilloscope and analysis tool...and more!
Features
real-time sampling rate up to 307ksps
equivalent-time sampling rate up to 16Msps
up to 2 channels
FFT display mode
bandwidth is around 100kHz
Pulse generator frequency range is from 0.238Hz to 8MHz
Function Generator frequency range is from 0.01Hz to 9999.99Hz (practically 1kHz)
Function Generator functions are sine, saw, reverse saw, triangle, noise, sinc5, trapezoid, chainsaw
settings are saved automatically
In the real-time sampling mode (not in the equivalent-time sampling mode), the pulse generator and the DDS function generator can be used at the same time with the oscilloscope. That is, you can observe the self generated pulse and the DDS function waveform.
Link in bio
3 weeks ago