LA ROUTE has a dual 1to4 or vice versa architecture. Signals can be fed in both directions. Switching frequencies of several kHz is no problem for the circuit.<\/p>\n
The 1to4 \/ 4to1 input jacks are used for the signals to be processed.<\/p>\n
The SELECT potentiometer sets the multiplexer channel manually and is summed with the voltage present at the CV input that is used to choose the corresponding switch in the multiplexer channel. Channel 2 is sellected with 2.5v, channel 3 with 5v and channel 4 with 7.5v.<\/p>\n
The HOLD is used to disable the routing function of the modules. All switches are isolated when a logic high (>1V) is present.<\/p>\n
The module can be used for many purposes.<\/p>\n
For example:
\n\u2022 Choose waveforms from an oscillator
\n\u2022 Choose Filter Output (or Input) characteristics from a State Variable Filter
\n\u2022 Multiplexing
\n\u2022 VC switch
\n\u2022 Patch Variations (Open\/Closed Hihats, something like that)
\n\u2022 By chaining the two circuits “back2back2” (4to1, 1to4) you can achieve complex
\nsource destination scenarios with lots of possibilities.<\/p>\n
In the middle you will find a precision processor. Select with a manual switch between + and – 5 or 10v. Select also with a manual switch if it has to be an attenuvertor or a attenuator.<\/p>\n
Depth: 25mm
\nHP: 2 inch
\nCurrent Draw: +12: 40mA -12: 35mA<\/p>\n